Evaluation of the effect of automotive bumper recycling by life-cycle inventory analysis

This paper describes a case study of the application of life-cycle inventory analysis to automotive bumper recycling. Two scenarios of bumper recycling are compared. One is “bumper-to-bumper recycling,” in which we recycle bumpers into more bumpers. The other is “cascade recycling,” in which bumpers are recycled into different parts of a car with a lower function. Inventory analysis is applied to both these recycling scenarios by analyzing the stages of acquiring natural resources, manufacturing materials, and parts, disposal, and recycling. We chose air emission, solid waste, and fossil fuel resources as items of the inventory analysis. We quantified the effect of reductions in the environmental load by recycling bumpers, and found that reductions in the environmental load were larger with cascade recycling than with bumper-to-bumper recycling based on current conditions. Received: February 2, 2000 / Accepted: April 21, 2000     

Time-series product and substance flow analyses of end-of-life electrical and electronic equipment in China

Given the amounts of end-of-life electrical and electronic equipment (EoL-EEE) being generated and their contents of both harmful and valuable materials, the EoL-EEE issue should be regarded not only as an emerging environmental problem but also as a resource management strategy in China. At present, in order to provide the basis for managing EoL-EEE at both product and substance levels in China, it is necessary to carry out a quantitative analysis on EoL-EEE and to determine how much of it will be generated and how much materials and substances it contains. In this study, the possession and obsolescence amounts of five types of household appliance (HA) including television (TV) sets and the amounts of substances contained in EoL TV sets were estimated using time-series product flow analysis (PFA) and substance flow analysis (SFA). The results of PFA indicated that the total possession amounts of those five types of HAs will exceed 3.1 billion units in 2030, which will be two times higher than those in 2010. In addition, it was estimated that cumulatively over 4.8–5.1 billion units of these five types of EoL HA would be obsoleted between 2010–2030. The results of SFA on TV sets indicated that the generated amounts of most of the less common metals and a part of common metals such as copper (Cu) would tend to decrease, whereas those of other common metals such as iron (Fe) as well as precious metals would tend to increase in EoL TV sets in 2015–2030. The results of this study provide a quantitative basis for helping decision makers develop strategic policies for the management of EoL-EEE considering both environmental and resource aspects. Moreover, a calculation scheme of obsolete HAs presented in this study can be applied to estimate other types of EoL durable good. Meanwhile, the frameworks of this study will help not only the policy decision makers in the Chinese government but also those in developing countries that are facing similar problems.     

Economic growth and selection of municipal waste treatment options in Bangkok

A reasonable selection of waste treatment options is indispensable to address challenges in waste management. Introduction of incineration plants for municipal waste in Bangkok had been considered in the past, but each time it was dismissed. In 2013, however, the Bangkok Metropolitan Administration (BMA) decided to introduce an incinerator facility with electricity generation. This study examined how changes in socio-economic factors resulting from economic growth affected the BMA’s decision. First, we conducted interviews of key relevant stakeholders (policymakers and other experts) to determine what kinds of changes in socio-economic factors affected their decision. Then, for interpretation and confirmation of the results from interview, we quantitatively estimated changes in environmental factors (e.g., greenhouse gas emissions), financial factors (e.g., construction and operating costs), and social factors (e.g., employment) in 1990, 2000, and 2012. Based on the result of interview and quantitative analysis, we illustrated the complicated structure of the mechanism of how economic growth affected the selection of waste treatment options in Bangkok, particularly those that led to the selection of the incineration. In addition to local conditions, global economic also affected the waste treatment policy in Bangkok even though waste management is usually thought of as a local issue.     

Rate of hexabromocyclododecane decomposition and production of brominated polycyclic aromatic hydrocarbons during combustion in a pilot-scale incinerator

Here, we examined the incineration of extruded polystyrene containing hexabromocyclododecane(HBCD) in a pilot-scale incinerator under various combustion temperatures(800–950℃) and flue gas residence times(2–8 sec). Rates of HBCD decomposition ranged from 99.996%(800℃, 2 sec) to 99.9999%(950℃, 8 sec); the decomposition of HBCD, except during the initial stage of combustion(flue gas residence time 2 sec), followed a pseudo-first-order kinetics model. An Arrhenius plot revealed that the activation energy and frequency factor of the decomposition of HBCD by combustion were 14.2 kJ/mol and 1.69 sec~(-1),respectively. During combustion, 11 brominated polycyclic aromatic hydrocarbons(BrPAHs)were detected as unintentional by-products. Of the 11 BrPAHs detected, 2-bromoanthracene and 1-bromopyrene were detected at the highest concentrations. The mutagenic and carcinogenic BrPAHs 1,5-dibromoanthracene and 1-bromopyrene were most frequently detected in the flue gases analyzed. The total concentration of BrPAHs exponentially increased(range,87.8–2,040,000 ng/m~3) with increasing flue gas residence time. Results from a qualitative analysis using gas chromatography/high-resolution mass spectrometry suggest that bromofluorene and bromopyrene(or fluoranthene) congeners were also produced during the combustion.     

Behavior of flames propagating through lycopodium dust clouds in a vertical duct

The structure of flame propagating through lycopodium dust clouds has been investigated experimentally. Upward propagating laminar flames in a vertical duct of 1800 mm height and 150×150 mm square cross-section are observed, and the leading flame front is also visualized using by a high-speed video camera. Although the dust concentration decreases slightly along the height of duct, the leading flame edge propagates upwards at a constant velocity. The maximum upward propagating velocity is 0.50 m/s at a dust concentration of 170 g/m³. Behind the upward propagating flame, some downward propagating flames are also observed. Despite the employment of nearly equal sized particles and its good dispersability and flowability, the reaction zone in lycopodium particles cloud shows the double flame structure in which isolated individual burning particles (0.5–1.0 mm in diameter) and the ball-shaped flames (2–4 mm in diameter; the combustion time of 4–6 ms) surrounding several particles are included. The ball-shaped flame appears as a faint flame in which several luminous spots are distributed, and then it turns into a luminous flame before disappearance. In order to distinguish these ball-shaped flames from others with some exceptions for merged flames, they are defined as independent flames in this study. The flame thickness in a lycopodium dust flame is observed to be 20 mm, about several orders of magnitude higher than that of a premixed gaseous flame. From the microscopic visualization, it was found that the flame front propagating through lycopodium particles is discontinuous and not smooth.     

Sensitivity analysis of source regions to PM2.5 concentration at Fukue Island,Japan

The authors analyze the sensitivities of source regions in East Asia to PM_2.5 (particulate matter with an aerodynamic diameter of ≤2.5 µm) concentration at Fukue Island located in the western part of Japan by using a regional chemical transport model with emission sensitivity simulations for the year 2010. The temporal variations in PM_2.5 concentration are generally reproduced, but the absolute concentration is underestimated by the model. Chemical composition of PM_2.5 in the model is compared with filter sampling data in spring; simulated sulfate, ammonium, and elemental carbon are consistent with observations, but mass concentration of particulate organic matters is underestimated. The relative contribution from each source region shows the seasonal variation, especially in summer. The contribution from central north China (105°E–124°E, 34°N–42°N) accounts for 50–60% of PM_2.5 at Fukue Island except in summer; it significantly decreases in summer (18%). Central south China (105°E–123°E, 26°N–34°N) has the relative contribution of 15–30%. The contribution from the Korean Peninsula is estimated at about 10% except in summer. The domestic contribution accounts for about 7% in spring and autumn and increases to 19% in summer. We also estimate the relative contribution to daily average concentration in high PM_2.5 days (>35 μg m^?3). Central north China has a significant contribution of 60–70% except in summer. The relative contribution from central south China is estimated at 46% in summer and about 30% in the other seasons. The contributions from central north and south China on high PM_2.5 days are generally larger than those of their seasonal mean contributions. The domestic contribution is smaller than the seasonal mean value in every season; it is less than 10% even in summer. These model results suggest that foreign anthropogenic sources have a substantial impact on attainment of the atmospheric environmental standard of Japan at Fukue Island.

Implications: The contribution from several source regions in East Asia to PM_2.5 concentration at Fukue Island, a remote island located in the western part of Japan and close to the Asian continent, is estimated using a three-dimensional chemical transport model. The model results suggest that PM_2.5 that is attributed to foreign anthropogenic sources have a larger contribution than that of domestic pollution and have a substantial impact on attainment of the atmospheric environmental standard of Japan at Fukue Island.     

Plant induced changes in concentrations of caesium, strontium and uranium in soil solution with reference to major ions and dissolved organic matter

For a better understanding of the soil-to-plant transfer of radionuclides, their behavior in the soil solution should be elucidated, especially at the interface between plant roots and soil particles, where conditions differ greatly from the bulk soil because of plant activity. This study determined the concentration of stable Cs and Sr, and U in the soil solution, under plant growing conditions. The leafy vegetable komatsuna (Brassica rapa L.) was cultivated for 26 days in pots, where the rhizosphere soil was separated from the non-rhizosphere soil by a nylon net screen. The concentrations of Cs and Sr in the rhizosphere soil solution decreased with time, and were controlled by K+NH(4)(+) and Ca, respectively. On the other hand, the concentration of U in the rhizosphere soil solution increased with time, and was related to the changes of DOC; however, this relationship was different between the rhizosphere and non-rhizosphere soil.     

Resource-availability scenario analysis for formal and informal recycling of end-of-life electrical and electronic equipment in China

In strategic end-of-life electrical and electronic equipment (EoL EEE) management, it has become important to not only avoid the negative environmental impacts but also enhance the positive effects of secondary resource utilization. This is especially true in emerging countries such as China, where medium- to long-term increases in the amount of EoL EEE generation are projected. This study aims to assess the resource availability potential for EoL EEE recycling based on penetration scenarios for formal and/or informal treatment options in China. We categorized substances contained in EoL television sets and personal computers into environmental, resource, and economic aspects under consideration of product transitions. Barium and copper have a high negative potential impact on human health and/or the ecosystem. Focusing on metals with a high resource potential, the resource availability is assessed under different treatment options using characterization factors identified through a life-cycle impact assessment method, the ReCiPe 2008. The results suggest that copper and lead recycling could alleviate the increase in mining costs of resource utilization. Scenario analysis for penetration of formal and informal recycling options indicated that the difference in the alleviated mining costs between the status quo and short-term transition projections until 2030 corresponds to 2.1–2.4 billion dollars.     

Identification and characterization of coagulation inhibitor proteins derived from cyanobacterium Microcystis aeruginosa

The excess growth of cyanobacteria in semi enclosed water areas caused by eutrophication brings about coagulation inhibition in drinking water treatment processes. In this study, coagulation inhibitor proteins produced by Microcystis aeruginosa, a major cyanobacterium in algal bloom, were acquired by a phage display technique, an aluminum-immobilized affinity chromatography and a protein expression technique using Escherichia coli cells. Two cyanobacterial peptides with a high ratio of metallophilic amino acids were recovered, which were a part of homologues of a thiol oxidase enzyme Ero1p and a trans-acting repressor ArsR. It was also shown that the homologue of ArsR exhibited a stronger inhibitory effect on the coagulation of kaolin suspension with polyaluminum chloride than the control proteins. This is the first report to identify a cyanobacterial cell component to inhibit coagulation. The compositions of polar amino acids were critical to explain the strength of coagulation inhibition potential. Polar proteins from cyanobacteria could collectively consume coagulants or stabilize clay particles, which would be plausible explanations for causing coagulation inhibition. Meanwhile, results from the kaolin coagulation tests using the control proteins implied that the neutralization of positive charges of coagulant constituents by simple electrostatic interactions might not be the key mechanism on the protein-induced coagulation inhibition.     

Variation of dust layer height in the northern Taklimakan Desert in April 2002

LIDAR observations were conducted in the northern Taklimakan Desert to investigate the vertical distribution of dust in April 2002. During the observation period, a dust outbreak occurred on 13 April, remaining over the desert for several days. Despite only slight variations being observed in dust layer height before the dust event, marked diurnal variation in dust layer height was observed after the dust event. In this study, we conducted two numerical simulations to investigate differences in the variation exhibited by the dust layer heights before and after the dust event, and assessed the influence of meteorological conditions on this variation. The simulated results show that the clearly diurnal variation in dust layer height is strongly influenced by local circulation which is affected by the characteristic topography and synoptic conditions of the Tarim Basin.